Product Description
Barnes EH1052L Submersible Effluent Pump Specifications
- BODY CONSTRUCTION: Cast Iron ASTM A-48, Class 30
- HORSEPOWER: 1.0 HP
- VOLTAGE: 575 V
- PHASE: 3 Ph
- HERTZ: 60 Hz
- RPM: 3450 RPM
- FULL LOAD AMPS: 2.8
- DISCHARGE PIPE SIZE: 2.0" NPT, Female, Vertical
- SOLIDS HANDLING: 3/4" Spherical Solids
- CORD LENGTH: 20'
- CORD SIZE & TYPE: 14/4, SOW
- MAX HEAD: 69'
- MAX FLOW RATE: 100 GPM
- SWITCH TYPE: Manual
- IMPELLER: 3-Vane Open with Pump Out Vanes on Back Side. Dynamically Balanced, ISO G6.3
Barnes EH-L Series Submersible Effluent Pump Performance Curve
Barnes EH-L Series Submersible Effluent Pump
Effluent Pumps are designed for handling dirty water in typical septic tank/effluent applications. High temperature models are available. Barnes Effluent Pumps are designed to handle most low and high head effluent applications.
Barnes EH-L Series Submersible Effluent Pump Applications
Pump is designed for handling sewage effluent in typical septic tank/effluent applications.
Barnes EH-L Series Submersible Effluent Pump Features
- Cast Iron Construction.
- NEMA B, Three Phase Torque Curve, Oil Filled, Squirrel Cage Induction Motor.
- Three Phase 200-240/480 is Tri-Voltage. 600V Requires Overload Protection to be Included in Control Panel.
- Upper Bearings: Single Row, Ball, Oil Lubricated. Lower Bearing: Single Row, Ball, Oil Lubricated.
- Single Mechanical Seal.
- Seal is Carbon/Ceramic/Buna-N Hardware -300 Series Stainless.
- Impeller is made of Polypropylene with Stainless Steel Insert.
- 2" NPT Female Vertical Discharge.
- Temperature Rating: 104°F (40°C) Continuous.
